Stripes seem to confuse my camera. Couldn't get this to focus properly for love nor money! |
Phew, that was a lot of firsts.
I was really hesitant going into this. I bought the fabric over a year ago, prepped it for cutting and sewing and then abandoned it. All I could hear in my head was What were you thinking?
This fabric, my lovely readers, is
Before construction I made sure to test, and test, and then test again. A bit of fiddling and the differential feed on my serger worked like a charm. No gathering or awful seam puckering to be seen. I used a three-thread overlock stitch, though I'd normally use a four thread for construction seams. It just seemed to handle my fabric better using that stitch, so lets hope it holds and I don't live to regret it.
My regular machine, my lovely Janome DC2101LE, handled the hemming and neckline just beautifully. I didn't need to fiddle with thread tension or feed dogs or anything. I whacked in the double needle (I used a Klasse Twin Stretch needle, Size 75, 2.5mm) and off I went. I was really careful not to push or pull the fabric through, just let it feed naturally into the machine. That's the thing with this fabric - it's quite heavy and I had to ensure I supported it's full weight at all times during sewing or I know I'd have ended up with wavy, stretched out hems.
But check out the results! Lovely.
![]() |
Lets ignore that stray thread there on the left... |
I used cotton/twill tape to stabilise the shoulder seams from neckline to about 8 inches down the seam. It worked a treat - simply fed it through on top of the seam as it went through the overlocker. This fabric really needs some help to not stretch out whilst being worn. I also took 2 inches off the length and my seams were also 5/8 inch, as I couldn't find directions about seam allowances until I had nearly finished the top.
Will I make it again?
Not sure, it's fairly distinctive so maybe not. If I did I'd remove some width from the neckline. It's very wide and P even asked if it was "one of those sexy off-the-shoulder numbers?" Um... no
If there is anyone out there who hasn't yet attempted knits, I'd recommend the pattern. It's a very forgiving garment, with little to no fitting to be done and any mistakes like uneven hem stitching, just disappears into its awesome voluminousness (did I just make that word up?).
My new fave top? I like it, I know I'll wear it as part of my jeans and top uniform. That will do for me...